QMot QSH6018 Series, Stepper Motors

Results:
7
Manufacturer
Series
Torque - Holding (oz-in / mNm)
Coil Resistance
Voltage - Rated
Operating Temperature
Current Rating (Amps)
Diameter - Shaft
Termination Style
Steps per Revolution
Size / Dimension
Mounting Hole Spacing
NEMA Frame Size
Length - Shaft and Bearing
Type
Accuracy
Features
Step Angle
Coil Type
Results remaining7
Applied Filters:
QMot QSH6018
Select
ImageProduct DetailPriceAvailabilityECAD ModelOperating TemperatureSeriesTypeCoil TypeVoltage - RatedCurrent Rating (Amps)Steps per RevolutionStep AngleAccuracyTorque - Holding (oz-in / mNm)Size / DimensionNEMA Frame SizeDiameter - ShaftLength - Shaft and BearingMounting Hole SpacingTermination StyleCoil ResistanceFeatures
QSH6018-86-90-300-10K
STEP MOTOR HYBRID NEMA24 + ENC
Contact us
Quantity
Contact us
PCB Symbol, Footprint & 3D Model
-
QMot QSH6018
Hybrid
Bipolar
2.1VDC
9 A
200
1.8°
±5%
424.93 / 3000
Square - 2.362" x 2.362" (60.00mm x 60.00mm)
24
0.315" (8.00mm)
0.945" (24.00mm)
1.856" (47.14mm)
Wire Leads
0.15 Ohms
Flatted Shaft
QSH6018-86-28-310-10K
STEP MOTOR HYBRID NEMA24 ENC 100
Contact us
Quantity
Contact us
PCB Symbol, Footprint & 3D Model
-20°C ~ 50°C
QMot QSH6018
Hybrid
Bipolar
4.17VDC
2.8 A
200
1.8°
±5%
439 / 3100
Square - 2.362" x 2.362" (60.00mm x 60.00mm)
24
0.315" (8.00mm)
0.945" (24.00mm)
1.856" (47.14mm)
Wire Leads
1.5 Ohms
Flatted Shaft
QSH6018-45-28-110
STEP MOTOR HYBRID BIPOLAR 2.1V
Contact us
Quantity
Contact us
PCB Symbol, Footprint & 3D Model
-20°C ~ 50°C
QMot QSH6018
Hybrid
Bipolar
2.1VDC
2.8 A
200
1.8°
±5%
155.77 / 1100
Square - 2.362" x 2.362" (60.00mm x 60.00mm)
24
0.315" (8.00mm)
0.945" (24.00mm)
1.856" (47.14mm)
Wire Leads
0.7 Ohms
Flatted Shaft
QSH6018-65-28-210-10K
STEP MOTOR HYBRID NEMA24 ENC 100
Contact us
Quantity
Contact us
PCB Symbol, Footprint & 3D Model
-20°C ~ 50°C
QMot QSH6018
Hybrid
Bipolar
3.36VDC
2.8 A
200
1.8°
±5%
297.4 / 2100
Square - 2.362" x 2.362" (60.00mm x 60.00mm)
24
0.315" (8.00mm)
0.945" (24.00mm)
1.856" (47.14mm)
Wire Leads
1.2 Ohms
Flatted Shaft
QSH6018-65-28-210
STEP MOTOR HYBRID BIPOLAR 3.36V
Contact us
Quantity
Contact us
PCB Symbol, Footprint & 3D Model
-20°C ~ 50°C
QMot QSH6018
Hybrid
Bipolar
3.36VDC
2.8 A
200
1.8°
±5%
297.38 / 2100
Square - 2.362" x 2.362" (60.00mm x 60.00mm)
24
0.315" (8.00mm)
0.945" (24.00mm)
1.856" (47.14mm)
Wire Leads
1.2 Ohms
Flatted Shaft
QSH6018-56-28-165
STEP MOTOR HYBRID BIPOLAR 2.52V
Contact us
Quantity
Contact us
PCB Symbol, Footprint & 3D Model
-20°C ~ 50°C
QMot QSH6018
Hybrid
Bipolar
2.52VDC
2.8 A
200
1.8°
±5%
233.66 / 1650
Square - 2.362" x 2.362" (60.00mm x 60.00mm)
24
0.315" (8.00mm)
0.945" (24.00mm)
1.856" (47.14mm)
Wire Leads
0.9 Ohms
Flatted Shaft
QSH6018-86-28-310
STEP MOTOR HYBRID BIPOLAR 4.17V
Contact us
Quantity
Contact us
PCB Symbol, Footprint & 3D Model
-20°C ~ 50°C
QMot QSH6018
Hybrid
Bipolar
4.17VDC
2.8 A
200
1.8°
±5%
438.99 / 3100
Square - 2.362" x 2.362" (60.00mm x 60.00mm)
24
0.315" (8.00mm)
0.945" (24.00mm)
1.856" (47.14mm)
Wire Leads
1.5 Ohms
Flatted Shaft

About  Stepper Motors

Stepper motors are a type of motion actuator that operates on DC voltage and moves in discrete steps. They are widely used in applications that require precise positioning or speed control. Stepper motors consist of multiple sets of coils, organized into groups called "phases," which determine the position of the motor's armature. To make the armature rotate, each phase is energized in a specific sequence. By energizing the phases in a controlled manner, the motor moves one step at a time. This discrete stepping action allows for accurate control over the motor's position and speed. Stepper motors are commonly managed by computers or microcontrollers, which send signals to the motor to control its movement. With this level of control, precise positioning and speed control can be achieved. When selecting a stepper motor, several specifications need to be considered. These include torque, steps per revolution, step angle, NEMA frame size, coil resistance, polarity, and shaft features. Torque refers to the rotational force produced by the motor and is an important consideration for applications requiring sufficient power to move loads. Steps per revolution indicates the number of steps required for the motor to complete one full rotation. This specification determines the motor's resolution and the precision of its movement. Step angle defines the angular distance covered by the motor with each step. It is typically expressed in degrees (e.g., 1.8° per step). The step angle is inversely proportional to the motor's resolution. NEMA frame size is a standardized classification system for stepper motors. It helps ensure compatibility between motors and their mounting arrangements. Coil resistance is an electrical property that affects the motor's performance. It influences the current flow and power consumption of the motor. Polarity refers to the electrical connections of the motor's coils. Correct polarity ensures proper operation and prevents damage to the motor. Shaft features include the type of shaft (e.g., round or D-shaped), shaft length, and shaft diameter. These specifications are important when considering how the motor will interface with other components. Overall, stepper motors provide precise positioning and speed control through their discrete stepping action. They are selected based on various specifications to suit specific application requirements, enabling automation and accurate motion control in a wide range of industries.